Product introduction: The RURG3060CC is an ultrafast dual diode with low forward voltage drop. This device is intended for use as freewheeling and clamping diodes in a variety of switching power supplies and other power switching applications. It is specially suited for use in switching power supplies and industrial application.

Product introduction: FGH60N60SFDTU: IGBT, Field Stop, 600V, 60A Using novel field stop IGBT technology, this IGBT offers the optimum performance for solar inverter, UPS, welder, and PFC applications where low conduction and switching losses are essential.

Product introduction: MMBT2222AL: NPN Bipolar Transistor The NPN Bipolar Transistor is designed for use in linear and switching applications. The device is housed in the SOT-23 package, which is designed for lower power surface mount applications.

Product introduction: BAV99L: 100 V switching diode, double, in series This switching diode is suitable for high-speed switching applications. This dual diode device contains two diodes packaged in series in a SOT-23 surface mount package.

Product introduction: AD8221 is a gain programmable, high-performance instrumentation amplifier. Among similar products in the industry, it has the highest common-mode rejection ratio (CMRR) relative to frequency. The CMRR of instrumentation amplifiers on the market today begins to drop at 200 Hz. In contrast, when G=1, the lowest CMRR of all grades of AD8221 is 80 dB and is as wide as 10kHz. The high common-mode rejection ratio (CMRR) relative to the frequency allows the AD8221 to suppress broadband interference and line harmonics, which greatly simplifies the filter requirements. Possible applications include precision data acquisition, biomedical analysis, and aerospace instruments.

Product introduction: The ADuM640x devices are quad-channel digital isolators with isoPower®, an integrated, isolated DC/DC converter. Based on the Analog Devices, Inc., iCoupler® technology, the DC/DC converter provides up to 500 mW of regulated, isolated power at either 5.0 V or 3.3 V from a 5.0 V input supply, or 3.3 V from a 3.3 V supply at the power levels shown in Table 1. This eliminates the need for a separate, isolated DC/DC converter in low power, isolated designs. The iCoupler chip scale transformer technology is used to isolate the logic signals and for the magnetic components of the DC/DC converter. The result is a small form factor, total isolation solution.

Product introduction: The ADG811 / ADG812 / ADG813 are low voltage CMOS devices containing four independently selectable switches. These switches offer ultralow on resistance of less than 0.8 Ω over the full temperature range. The digital inputs can handle 1.8 V logic with a 2.7 V to 3.6 V supply.

Product introduction: ​The high performance ADXL350 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) and selectable measurement ranges up to ±8g. The ADXL350 offers industry-leading temperature performance with guaranteed min/max specification for offset over temperature. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.

Product introduction: MP8770 is a fully integrated high frequency synchronous rectification step-down switch mode converter with internal power MOSFET. MP8770 provides a very compact solution, can achieve 8A continuous output current in a wide input range, with excellent load and linear regulation. MP8770 adopts synchronous mode operation within the output current load range to achieve higher efficiency.

The MP4688 is a high voltage input step-down switching regulator to deliver a constant current of up to 1A to high power LEDs. It integrates a high-side high voltage power MOSFET with a current limit of 3.2A (typical value). The wide 4.5V to 80V input range accommodates a variety of step-down applications, making it ideal for automotive, industry and general lighting applications.

Product introduction: Lite-On Group was established in 1975. It started from the production of light-emitting diodes (LED). In 1983, it took the lead in promoting the stock market and owned the first listed electronic company in Taiwan. For more than 30 years, in addition to dedicating to optoelectronic components, we have continued to expand computer and digital homes, consumer electronics, communication products, key components and sub-systems, and gradually step into 4C fields such as automotive electronics. It has a pivotal role in the market. status.

Product introduction: The LTR-553ALS-01 is an integrated low voltage I2C digital light sensor [ALS] and proximity sensor [PS] with built-in emitter, in a single miniature chipled lead-free surface mount package. This sensor converts light intensity to a digital output signal capable of direct I2C interface. It provides a linear response over a wide dynamic range from 0.01 lux to 64k lux and is well suited to applications under high ambient brightness. With built-in proximity sensor (emitter and detector), LTR-553ALS-01 offers the feature to detect object at a user configurable distance.

Product introduction: Intel Ethernet network controller is an independent compact controller with integrated Gigabit Ethernet media access control (MAC) and physical layer (PHY), or is designed to be connected via integrated media access control (MAC) The physical layer (PHY) of the appropriate Intel chipset. These devices are all designed for use in small space desktops, workstations and personal laptop network designs. With each device, Gigabit Ethernet can be realized in a small space that is compatible with the current generation of 10/100Mbps Fast Ethernet design.

Product introduction: Series 7 Express chipset (previously called Panther Point) supports the Ivy Bridge processor micro-architecture for mobile and desktop applications. The Series 7 Express chipset supports various I/O. Intel 7 Express chipset provides PCI Express 2.0, ACPI power management, enhanced DMA controller, serial ATA, USB 2.0 and 3.0 host interfaces, Gigabit Ethernet, SMBus 2.0 with I2C, Intel HD Audio, Intel Rapid Storage Technology, Intel Active Management Technology, Intel I/O Virtualization Technology, Intel Trusted Execution Technology, Intel Flexible Display Interconnect, integrated clock...

Semtech offers TVS (Transient Voltage Suppression) diodes to protect low-voltage circuits from damage or latch-up effects caused by electrostatic discharge (ESD), lightning, and other destructive voltage transients. Our circuit protection equipment has the characteristics of low clamping voltage, low capacitance and low leakage current. At the same time, the device also complies with the most stringent transient immunity standards in the industry, including the transient immunity standards of IEC, ETSI, Telcordia 1089 and FCC Part 68.

Product introduction: SX8652IWLTRT, SEMTECH touch screen controller 5-WIRE RESISTIVE TOUCH SCREEN

Product introduction: SC189 is a high-efficiency, synchronous step-down regulator, adopts ultra-small 2mm x 2mm thin package or low-cost SOT23-5 package, can provide up to 1.5A output current.

Product introduction: Semtech SX1301 LoRa Core™ digital baseband chip for outdoor LoRaWAN™ network large-scale gateway. The SX1301 digital baseband chip is a huge digital signal processing engine that specifically provides breakthrough gateway capabilities for the global ISM frequency band. It integrates LoRa Concentrator IP.

APT32F1021 APT32F102 is a 32-bit high-performance, low-cost single-chip microcomputer developed by APT Microelectronics based on the T-HEAD Semiconductor CPU core. The applications of APT32F102 MCU are industrial control, touch home appliances, consumer electronic devices, wearable devices and other applications. Our company is an authorized agent, welcome to consult and negotiate.

Texas Instruments PTH04070W Adjustable Integrated Switching Regulator (ISR) provides output current with much higher efficiency and much lower power consumption than standard TO-220 linear regulator ICs without the need for a heat sink. TI PTH04070W ISR can provide up to 3A output current and 3V to 5.5V input voltage, allowing operation on 3.3V or 5V input bus. Texas Instruments PTH04070W ISR is designed for telecommunications, test and measurement applications, and high-end consumer products.

As a global leader in logic devices, Texas Instruments (TI) provides a complete range of logic function devices and technologies, from mature bipolar and bipolar complementary metal oxide semiconductor (BiCMOS) series to the latest advanced CMOS series. Everything is available. TI can provide the logic performance and characteristic process technology required by today's electronic market, while still supporting traditional logic products.